Sweety
2004-02-05 20:28:56 UTC
Hello my 56kbps PCI dlink motorola speakerphone modem
on intel810 cheapset can't able to connect.plz help me in
this regard.The statistics on several command as below::
Redhat Linux 9.0(Shrike) Kernel 2.4.20-6 on i686.
[***@localhost root]# setserial -agv /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
[***@localhost root]# lspci
00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
Controller
Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC
[Chipset Graphics Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio
(rev 02)
01:04.0 Communication controller: Analog Devices SM56 PCI modem
[***@localhost root]# cat /proc/pci gives also.......
Communication controller: Analog Devices SM56 PCI modem (rev 0).
IRQ 10.
Master Capable. Latency=64. Min Gnt=1.Max Lat=255.
Prefetchable 32 bit memory at 0xe7bfff00 [0xe7bfffff].
[***@localhost root]# ls -l /dev/modem
ls: /dev/modem: No such file or directory
[***@localhost sbin]# sm56setup
Motorola SM56 SoftModem Setup for Linux
Building driver...
`/usr/local/sm56/sm56.o' ->
`/lib/modules/2.4.20-6/kernel/drivers/char/sm56'
Creating device /dev/sm56...
Pointing /dev/modem to /dev/sm56...
Adding SM56 to /etc/modules.conf...
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56
SM56 setup complete.
[***@localhost sbin]# depmod -a
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56
[***@localhost sbin]# mknod /dev/ppp c 108 0
mknod: `/dev/ppp': File exists
[***@localhost sbin]# chmod 666 /dev/ppp
[***@localhost root]# depmod -u |more
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56depmod: *** Unresolved
symbols in /lib/modules/2.4.20-6/kernel/drivers/char/sm56.o
[***@localhost dev]# setserial -g /dev/ttyS1
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
[***@localhost dev]# setserial -g /dev/ttyS0
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
on intel810 cheapset can't able to connect.plz help me in
this regard.The statistics on several command as below::
Redhat Linux 9.0(Shrike) Kernel 2.4.20-6 on i686.
[***@localhost root]# setserial -agv /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
[***@localhost root]# lspci
00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
Controller
Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC
[Chipset Graphics Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio
(rev 02)
01:04.0 Communication controller: Analog Devices SM56 PCI modem
[***@localhost root]# cat /proc/pci gives also.......
Communication controller: Analog Devices SM56 PCI modem (rev 0).
IRQ 10.
Master Capable. Latency=64. Min Gnt=1.Max Lat=255.
Prefetchable 32 bit memory at 0xe7bfff00 [0xe7bfffff].
[***@localhost root]# ls -l /dev/modem
ls: /dev/modem: No such file or directory
[***@localhost sbin]# sm56setup
Motorola SM56 SoftModem Setup for Linux
Building driver...
`/usr/local/sm56/sm56.o' ->
`/lib/modules/2.4.20-6/kernel/drivers/char/sm56'
Creating device /dev/sm56...
Pointing /dev/modem to /dev/sm56...
Adding SM56 to /etc/modules.conf...
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56
SM56 setup complete.
[***@localhost sbin]# depmod -a
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56
[***@localhost sbin]# mknod /dev/ppp c 108 0
mknod: `/dev/ppp': File exists
[***@localhost sbin]# chmod 666 /dev/ppp
[***@localhost root]# depmod -u |more
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-6/kernel/drivers/char/sm56depmod: *** Unresolved
symbols in /lib/modules/2.4.20-6/kernel/drivers/char/sm56.o
[***@localhost dev]# setserial -g /dev/ttyS1
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
[***@localhost dev]# setserial -g /dev/ttyS0
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4